Adapting a280ZXT drive train into a 280Z

[gotmoxz]

I have an '83 280ZXT drive train complete that I'm planning on retrofitting into a '77 280Z. Does anyone here know how to adapt the 280ZXT rear-end into the 280Z? I have so far pulled the complete rear end (diff & stub axles). Will the 280ZXT stub axles connect (via some sort of adapter) to the original 280Z hubs or must I adapt the 280ZXT hubs to the 280Z suspension? Thanks much!

[muzzy]

try getting a hold of jim his handle here is 1982zxt or blue but i think the propeler shaft of the zxt bolt up to the stock stub shafts on the 280z u just have to remove the xz mount off the the r200 diff and use the stock one from your car 

[gotmoxz]

http://alteredz.com/280ZCVHalfshaftConversion.htm This is what I was looking for, thanks. My identification of parts was a bit off, right church - wrong pew so to speak.