Atlantic Z Car Club Z Sport Canada
April 21, 2014, 05:47:25 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
Join us on facebook! Andrew started a facebook group for us. Join and help spread the word about our club. Keep in touch with fellow members and it's a great way to organize group rides this summer.
 
   Home   Help Search Calendar Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Adapting a280ZXT drive train into a 280Z  (Read 1289 times)
0 Members and 1 Guest are viewing this topic.
gotmoxz
Newbie
*
Offline Offline

Posts: 3


« on: February 18, 2012, 12:14:45 AM »

I have an '83 280ZXT drive train complete that I'm planning on retrofitting into a '77 280Z. Does anyone here know how to adapt the 280ZXT rear-end into the 280Z? I have so far pulled the complete rear end (diff & stub axles). Will the 280ZXT stub axles connect (via some sort of adapter) to the original 280Z hubs or must I adapt the 280ZXT hubs to the 280Z suspension? Thanks much!
Logged
muzzy
Atlantic Z Club Member
Sr. Member
*****
Offline Offline

Posts: 192



« Reply #1 on: February 18, 2012, 06:54:39 PM »

try getting a hold of jim his handle here is 1982zxt or blue but i think the propeler shaft of the zxt bolt up to the stock stub shafts on the 280z u just have to remove the xz mount off the the r200 diff and use the stock one from your car 
Logged

01/71 240Z
gotmoxz
Newbie
*
Offline Offline

Posts: 3


« Reply #2 on: February 19, 2012, 01:49:10 AM »

http://alteredz.com/280ZCVHalfshaftConversion.htm This is what I was looking for, thanks. My identification of parts was a bit off, right church - wrong pew so to speak.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.303 seconds with 21 queries.