L type engine 1

Piston KIT for L type race L3 - 3.1 Piston KIT for business race Major diameter: 89, 89.25 and 89.5 φ On pin: 29�o-0 +0.05 Pin diameter: 21 φ (Full floating type) Material: AC 8 B (aluminum alloy) Hardness: HRB63 - 75 Manufacturing method: Casting Finishing: スズメッキ Heat treatment: T-6 Recess quantity: IN4.5�oEX4.8�o * Piston pin Material: Chrome molybdenum steel Manufacturing method: It starts shaving, Hardness: Surface HRA80 - 83 Inside HRC25 - 40 Heat treatment: Cementation quenching Tempering Price (kit) $783 * Piston ring (High pressure reduction high revolution correspondence: Enhanced) - TOP 2ND OIL Thickness 1.2�o 1.2�o 2.8�o Joint 0.2�o 0.2�o 0.45�o Finishing Gas nitriding Gas nitriding Gas nitriding L 3 0 - 3 1 liter KIT L3 liter KIT Contents: Piston for race/lace 139.5�o クロモリ lightweight connecting rod Metal head gasket 1.0�o L3.1 liter KIT Contents: Piston for race/lace 138�o クロモリ lightweight connecting rod Metal head gasket 1.5�o LD28 crankshaft (1 key, bending correction and balance) Trade item name Price (kit) L3 liter Kit $1,900 L3.1 liter Kit  $3,408 Pulley for L type race/lace Pulley full KIT for race Value case $423 We have become the design which considers each pulley rotary ratio with the pulley full kit which consists of the strengthening part, it can correspond to the engine of high rotary specification. 11 �o strengthening fan belts (single unit) Price (kit) $37 With the strengthening item which is strong in the extending and being cut off of the belt durability with high revolution the sufficient. Crank pulley -(single unit) Price (kit) $156 The race/lace pulley of the single belt type whose vibration absorption is good. クロモリウォーターãƒ�ンプ Pulley(single unit) Price (kit) $162 Adopting the pulley ratio which most is suited for water temperature management! Aluminum Bick dynamo Pulley (single unit) Price (kit) $73 And burden to the dynamo is decreased with use with high revolution and sufficient charge is guaranteed low with revolution. (Shaft diameter 17 φ business)

L 3 0 - 3 1 street piston KIT L30 street piston KIT For L20 connecting rod Major diameter: 89 φ Pin diameter: 21 φ On pin: 35.5�o Use connecting rod: L20 connecting rod (Full flow process necessity) L30 street piston KIT For L28 connecting rod Major diameter: 89 φ Pin diameter: 21 φ On pin: 38.1�o Use connecting rod: L28 connecting rod (Full flow process necessity) L31 street piston KIT For L20 connecting rod Major diameter: 89 φ Pin diameter: 21 φ On pin: 33.5�o Use connecting rod: L20 connecting rod (Full flow process necessity) Also the right description 3 commodity Price (kit) $792 L type type �U クロモリ lightweight connecting rod Also the right description 2 commodity Price (kit) XXYEN 20,000 * At the time of high revolution because it corresponds to the powerful tensile stress which is required, the type �U connecting rod which adds modification to volt/bolt of the former クロモリ lightweight connecting rod did release! Volt/bolt the ARP corporation whose reliability is high strength (USA) special order below doing, does not use the nut in volt/bolt type and loose one form becomes possible by cutting the screw in the rod itself, guarantees the strength around the large end. The クロモリ lightweight connecting rod for L3.0 Between core: 139.5�o L3. For 1 クロモリ lightweightconnecting rod Between core: 138�o * Connecting rod Manufacturing method: Forging (top and bottom one die) Material: Chrome molybdenum steel Heat treatment: Quenching tempering Finishing: Shot blast Hardness: HB285 - 352 Coining: I type rib section both sides Volt/bolt: ARP corporation make (Strength standard 190000psi) Pin diameter: 21 φ (full flow processing) Weight: Below 620g (within dispersion 5g) L 3 For 1 LD 28 crankshaft LD28 crankshaft (processed item) Contents: 1 key processing, Bending correction and balance taking LD28 crankshaft(full processed item) Contents: 1 key processing and bending correction, Balance taking, Tufftride surface heat treatment and journal lapping Trade item name Price LD28 crankshaft (processed item) $1,538 LD28 crankshaft(full processed item) $1.897

- As for the above-mentio L type twin idler gear The fatal weak point of the L type engine is the chain tensioner -. ãƒ��…ーン and the chain tensioner -, the burden which reaches to the guide already exceeds the limit attendant upon the Takaide power high revolution conversion of the engine. The camshaft evolves. It converts valve spring hard. And importance of the val tie pursues the high performance, but compromise is not permitted on. Being proportionate to revolution, the friction loss which it increases. Stretching ãƒ��…ーン, directly, the guide and the chain tensioner which wear -. Fundamental remodelling is indispensable in process of L type evolution. The twin idler gear improves the stability of reduction and valve timing of substantial friction loss with the new mechanism by the needle roller bearing type top and bottom twin sprocket, directs to the evolution of L type and leaps largely. * The above-mentioned picture (the buff to finish), they are set contents. Other taking theory attachment. Plate color (3 types) Price (kit) アールズレッド $442 アールズブルー Buff finish - The new mechanism which returns and the chain tensioner side - with does not use the chain guide completely! - Head surface research in 0 - 5�o correspondence cam holder - spacer unnecessary! - The rocker guide be able to make thin, improvement light weight conversion and following characteristic. - Stability of substantial decrease and the val tie of friction loss rapid improvement. METAL L type WPC molybdenum metal Until recently below-mentioned ニスモメタル of the item it is the strengthening metal which administers special finishing to the metal surface in the base. When it is different from general WPC processing, making individual lubricant by the fact that molybdenum sulfide powders which are known well are injected directly, solid lubricant permeates into surface organization of the metal, minuteness rugged forming simultaneously on the surface, it raises the oil film retention effect. It decreases the friction largely with this double effect, holds down the occurrence of worn heat and burns and the load can improve substantially and it can lighten the damage of the metal which is the weak point of L type. Classified by engine Main set price Connecting rod set price L6 $222 $180 * Order the case of estimate, item turn (size) appointment we request the below-mentioned chart to reference. No, Item turn Trade item name Necessary quantity Single value (1) Picking out main point Oil clearance (1 μ =1/1000�o) 1 W12111-22010 Connecting rod metal 12 $15 40 - 96 μ spreading W12111-22011 Connecting rod metal 12 $15 24 - 76 μ standards W12111-22012 Connecting rod metal 12 $15 4 - 56 μ narrow ã‚� 2 W12231-22010 Main bearing inner 8 $15 50 - 102 μ spreading W12231-22011 Main bearing inner 8 $15 30 - 82 μ standards W12231-22012 Main bearing inner 8 $15 10 - 62 μ narrow ã‚� 3 W12216-22010 Main bearing outer 4 $15 50 - 102 μ spreading W12216-22011 Main bearing outer 4 $15 30 - 82 μ standards W12216-22012 Main bearing outer 4 $15 10 - 62 μ narrow ã‚� 4 W12247-22010 Main bearing center 2 $22 50 - 102 μ spreading W12247-22011 Main bearing center 2 $22 30 - 82 μ standards W12247-22012 Main bearing center 2 $22 10 - 62 μ narrow ã‚� L type ニスモメタル Classified by engine Main set price Connecting rod set price L6 $152 $121 * Order the case of estimate, item turn (size) appointment we request the below-mentioned chart to reference. No, Item turn Trade item name Necessary quantity Single value (1) Picking out main point Oil clearance (1 μ =1/1000�o) 1 12111-22010 Connecting rod metal 12 $10 40 - 96 μ spreading 12111-22011 Connecting rod metal 12 $10 24 - 76 μ standards 12111-22012 Connecting rod metal 12 $10 4 - 56 μ narrow ã‚� 2 12231-22010 Main bearing inner 8 $10 50 - 102 μ spreading 12231-22011 Main bearing inner 8 $10 30 - 82 μ standards 12231-22012 Main bearing inner 8 $10 10 - 62 μ narrow ã‚� 3 12216-22010 Main bearing outer 4 $10 50 - 102 μ spreading 12216-22011 Main bearing outer 4 $10 30 - 82 μ standards 12216-22012 Main bearing outer 4 $10 10 - 62 μ narrow ã‚� 4 12247-22010 Main bearing center 2 $10 50 - 102 μ spreading 12247-22011 Main bearing center 2 $10 30 - 82 μ standards 12247-22012 Main bearing center 2 $10 10 - 62 μ narrow ã‚� - Detailed data No, Item turn ï½´ ï¾� ï½¼ ﾞ ï¾� type Position A B C D E F G H T Material Remark 1, 12111-22010 - 2 L type ｺ ï¾� ï¾› ｯ ﾄ ﾞ 53.01 22.0 4.6 0 1.4 5.6 - - Approximately 1.5 F112 2.5 there is a ï½½ ﾌ ﾟ ï¾— ｯ ï½¼ ï½­ hole φ, 2, 12231-22010 - 2 L type ï¾’ ï½² ï¾� ï½² ï¾� ï¾… ï½° 58.66 23.0 4.6 2.6 1.4 5.6 - - Approximately 1.83 F112 - 3, 12216-22010 - 2 L type ï¾’ ï½² ï¾� ï½± ï½³ ï¾€ ï½° 58.66 26.0 4.6 3.1 1.4 5.6 - - Approximately 1.83 F112 - 4, 12247-22010 - 2 L type ï¾’ ï½² ï¾� ï½¾ ï¾� ï¾€ ï½° 58.66 28.0 4.6 4.1 1.4 5.6 31.9 74.5 Approximately 1.83 F112 - * When the above-mentioned picture is clicked, it expands. L3.1 full counter crankshaft Material SCM440H ï½½ ﾄ ï¾› ï½° ｸ 83�o Surface heat treatment SQ processing Manufacturing method it starts shaving, ï½µ ï½² ï¾™ hole diameter ï¾’ ï½² ï¾� 7 φ ﾋ ﾟ ï¾� 6 φ Weight 22 Kg Finishing ï½¼ ï½® ｯ ﾄ ﾌ ﾞ ï¾— ï½½ ﾄ Hardness HRC30 Within rotary ﾊ ﾞ ï¾— ï¾� ï½½ 4gf/�p ï½¼ ﾞ ｬ ï½° ï¾… ï¾™ finish oxidation ｸ ï¾› ï½° ﾑ grinding It starts shaving, is but in reason possible lightweight ﾊ ï½² ﾊ ﾞ ï¾— ï¾� ï½½ ratio ï½³ ï½´ ï½² ﾄ form. The part for the ultimate ﾚ ï½° ï½½ which is designed in order runs the ï½¾ ﾞ ï¾› ï¾– ï¾� faster and to pull out. Price $4,329 L type crank cap strengthening stud bolt Kit The strengthening ï½½ ï¾€ ｯ ﾄ ﾞ ﾎ ﾞ ï¾™ ﾄ ï½· ｯ ﾄ in order to hold down high revolution and the ｸ ï¾— ï¾� ｸ vibration at the time of high load. (The ﾎ ﾞ ï¾™ ﾄ ï½µ ï¾�, the ﾉ ï½° ï¾� ï¾™ ï½» ï½² ï½½ ﾞ) it tightens, the ﾄ ï¾™ ｸ (the ï½µ ï½² ï¾™): 8kg/m (ï¾— ï½² ï¾� unnecessary) - 10kg/m (ï¾— ï½² ï¾� necessity) L6 kit $157 Strengthening crank pulley - bolt Looseness of the ﾎ ﾞ ï¾™ ﾄ is prevented the ｸ ï¾› ﾓ ﾘ ﾜ ｯ ï½¼ ｬ - withwith the combination with the ï¾› ï¾� ｸ ﾞ ﾎ ﾞ ï¾™ ﾄ and the ﾌ ﾟ ï½° ﾘ ï½° ﾄ ï¾— ﾌ ﾞ ï¾™ is prevented. Price $32 L type adjustment type chain tensioner - The ï½½ ﾄ ï¾› ï½° ｸ adjustment which responds to the flexion of the ï¾� ｪ ï½° ï¾� to be possible, the val tie stability ï½± ｯ ﾌ ﾟ at the time of high revolution! ｶ ﾑ exchange you feel at rest with the springing out prevention attaching. Price $120 L 28 overhaul kit Commodity contents SI way Price Set of case gasket & oil seal! STD $82 Set of case gasket & oil seal! Strengthening oil pan GK attaching $110 * Manifold GK and head GK are not included in the above-mentioned kit. L type strengthening connecting rod volt/bolt & nut (Normal weight 80 g) SI way Weight L4 L6 Strengthening connecting rod volt/bolt + クロモリナット SET 71 g $184 $276 Strengthening connecting rod volt/bolt + titanium nut SET 64 g $258 $389 The ﾎ ﾞ ï¾™ ﾄ for the ﾚ ï½° ï½½ which, light weight such as substantial tensile strength rise and improvement of the circularity with pressing in system holds with the adoption of SNCM439. L type high pressure bulk oil pump The necessity because lightens ï½´ ï¾� ï½¼ ﾞ ï¾� wear with stability supply of the ï½µ ï½² ï¾™ and the ï½· ï½° ﾌ ﾟ it can point high oil pressure! The ﾜ ｯ ï½¼ ｬ - furthermore the pressure ï½± ｯ ﾌ ﾟ it is possible with addition. Price $92 S30 bulk aluminum oil pan The necessity because lightens ï½´ ï¾� ï½¼ ﾞ ï¾� wear with stability supply of the ï½µ ï½² ï¾™ and the ï½· ï½° ﾌ ﾟ it can point high oil pressure! The ﾜ ｯ ï½¼ ｬ - furthermore the pressure ï½± ｯ ﾌ ﾟ it is possible with addition. Price $92 Strengthening oil pan gasket From the genuine cork to the strengthening gasket looseness and a leak of the ﾎ ﾞ ï¾™ ﾄ can be prevented with the strengthening item which administers material modification. L6 $35

L type head parts

L type strengthening head stud bolt The ｡which can guarantee sufficient tensile strength with the stud system which is set by the American APP corporation and the relieved secure torque management ｶ ﾞ it is possible L 6 set $203 L type lightweight retainer - Size L6 クロモリ 0�o/1.0�o/2.0�o/3.0�o setup $250 Titanium 0.5�o/1.5�o/2.5�o/3.5�o setup $386 L type strengthening ﾊ ﾞ ﾙ ﾌ ﾞ cotter - The ｡which can prevent the dispersion and engine trouble of the spring set length due to オー�ーレブ and the surging and can maintain the best condition L 6 Set $42 L type tappet cover Now as for ﾚ ﾌ ﾟ ﾘ ｶ item ｡ﾌ ｧ ｯ ｼ ｮ � characteristic of the ﾀ � ﾟ ｯ ﾄ ｶ ﾊ ﾞ ｰ for export of premiere item, the ｡which can decrease also the ﾀ � ﾟ ｯ ﾄ ﾉ ｲ ｽ ﾞ of course Not yet paint item Value case $442

Seat ring for L type race/lace With the seat rings for 46/38 φ valve the ｡where the material of 2 types is prepared according to use SI way L6 For long distance ﾚ ｰ ｽ $221 The for short range ﾚ ｰ ｽ $360 * The above-mentioned specification entry. L type lightweight Bick valve Set ﾊ ﾞ ﾙ ﾌ ﾞ diameter ﾊ ﾞ ﾙ ﾌ ﾞ total length ｼ ｰ ﾄ ﾘ � ｸ ﾞ entrance substitution ｳ ｴ ｲ ﾄ section diameter Weight difference IN46 φ 117�o118�o119�o Necessity φ 7.5 Within 1g IN45 φ 118�o Unnecessary (L28) φ 7.5 Within 1g EX38 φ 117�o118�o119�o Necessity φ 7.3 Within 1g EX36.5 φ 118�o Unnecessary (L28) φ 7.3 Within 1g * The above-mentioned valve diameter entry. L 6Set $442 L type ｸ ﾛ ﾓ ﾘ ﾛ ｯ ｶ ｰ ｶ ﾞ ｲ ﾄ ﾞ Abrasion resistance of course adopting the heat treatment method which gives the stickiness characteristic which also damage of the nail is considered with the strengthening item which uses the クロモリ material! The design which is superior in safety. Size Value case (1) 2.0�o - 7.0�o 1 - $8 * The above-mentioned size entry.

 

L type turtle possession master camshaft Type Name name カムリフト Valve lift Central angle Finishing Value case Preparation thought L6 73 degrees A 8.6   12.6 102.5 degrees  ï¾˜ ï½­ ï½° ﾌ ﾞ ï¾— ï½² ﾄ $645 ﾉ ï½° ï¾� ï¾™ ﾊ ﾞ ï¾™ ﾌ ﾞ correspondence, for ï½½ ﾄ ﾘ ï½° ﾄ 75 degrees A 8.6 12.6 104 degrees  ï¾˜ ï½­ ï½° ﾌ ﾞ ï¾— ï½² ﾄ $645 ﾉ ï½° ï¾� ï¾™ ﾊ ﾞ ï¾™ ﾌ ﾞ correspondence, for ï½½ ﾄ ﾘ ï½° ﾄ 77 degrees G 9.6 14.0 104 degrees  ï¾˜ ï½­ ï½° ﾌ ﾞ ï¾— ï½² ﾄ $921 Medium or high speed rotary type 77 degrees H 10/9.6 14.7/14.0 103 degrees  ï¾˜ ï½­ ï½° ﾌ ﾞ ï¾— ï½² ﾄ $921 The highest speed, turning at full speed type 77 degrees i 10.0 14.7 101.5 degrees  ï¾˜ ï½­ ï½° ﾌ ﾞ ï¾— ï½² ﾄ $921 Drug, for circumference ﾚ ï½° ï½½ L type turtle possession master camshaft 3 point set Type Permitting/inserting inside trade item Value case Remark L6 73degreeA+ ï¾› ï½° ﾘ ﾌ ﾄ ﾊ ﾞ ï¾™ ﾌ ﾞ ï½½ ﾌ ﾟ ﾘ ï¾� ｸ ﾞ + ï¾› ｯ ｶ ï½° ｶ ﾞ ï½² ﾄ ﾞ $921 * In the L28 ﾉ ï½° ï¾� ï¾™ ï¾� ｯ ﾄ ﾞ you can install with non processing. 75degreeA+ ï¾› ï½° ﾘ ﾌ ﾄ ﾊ ﾞ ï¾™ ﾌ ﾞ ï½½ ﾌ ﾟ ﾘ ï¾� ｸ ﾞ + ï¾› ｯ ｶ ï½° ｶ ﾞ ï½² ﾄ ﾞ $921 * Selection from the cam of the above-mentioned 2 types.

L type クロモリロッカーアーム L 6 Set $608 L type ãƒ�ルブスプリングワッ ï½¼ ｬ ï½° As for installation length of valve spring, in regard to efficiency improvement important point! With combination of the ワッ ï½¼ ｬ ï½° of the thickness difference, more precise set long adjusting is possible. Type system Size Value case L 6 Set  0.5/0.8�o (rose 1 \300) $67 L type ｸ ï¾› ﾓ ﾘ strengthening cylinder head bolt washer At the time of the ï¾� ｯ ﾄ ﾞ ﾎ ﾞ ï¾™ ﾄ tightening the measure item which is not the sled rising! It can prevent also the ｶ ﾞ ï½½ ï½¹ ｯ ﾄ coming out from the fact that the tightening ﾄ ï¾™ ｸ can be maintained in long term. L 6 Set $92

L type SPL valve spring * As for the ﾊ ï½² ﾘ ﾌ ﾄ corresponding ﾊ ﾞ ï¾™ ﾌ ﾞ ï½½ ﾌ ﾟ ﾘ ï¾� ｸ ﾞ, IN and EX become the respective private design, become combination of the quality difference. * Installation length of the ï½½ ﾌ ﾟ ﾘ ï¾� ｸ ﾞ has the necessity to modify in the below-mentioned length vis-a-vis 40�o of the ﾉ ï½° ï¾� ï¾™. You can adjust (the ï½½ ﾌ ﾟ ﾘ ï¾� ｸ ﾞ ﾜ ｯ ï½¼ ｬ - the ､ ﾘ ﾃ ï½° ï¾… - with combination such as ､ ﾊ ﾞ ï¾™ ﾌ ﾞ.) Those which are required from the ï½½ ﾌ ﾟ ﾘ ï¾� ｸ ﾞ, that is the private design which limits working condition. Role of each ﾊ ﾟ ï½° ﾂ which surrounds dynamic valve system, each connection such as action and inertial forces in regard to the design, becomes the serious element. The ï½¢ pressing in + unequal ﾋ ﾟ ｯ ï¾� ï½£ L type private design, being to be the ï½½ ï¾� ﾟ ï½¼ ｬ ï¾™ ﾊ ﾞ ï¾™ ﾌ ﾞ ï½½ ﾌ ﾟ ﾘ ï¾� ｸ ﾞ which can see the difference of efficiency under the harshest condition it does. Item name SI way Value case 10,000rpm correspondence カムリフト: 9.0 - 10.0�o/ installation length 43 - 44�o $304 9,000rpm correspondence カムリフト: 8.0 - 9.0�o/ installation length 40 - 41�o $220 L type cam holder - spacer As the flexion of ãƒ��…ーン with the surface research is prevented and the val tie is made to stabilize, you can aim also the reduction of friction loss. Type system Size Value case L 6 Set 1.2/1.6/2.0�o $92 L type oil filler - cap 2 types as for the filler cap which is prepared there is with the logographic entering of the circle and the forged part which it starts shaving with all aluminum. Circle $46 DATSUN $74

L type plated part

Description above, we use the stainless steel volt/bolt set/ part plated part. * Installation reference picture example ↓ click ↓ of above-mentioned stain volt/bolt * You install the one for dynamo and the farm shop nut / the washer each 1, uni- clo plating (the gold) are. 1 L6 plating tappet cover $257 - 2 L type plating thermostat cover (2 ﾎ ﾞ ﾙ ﾄ) $32 (The ｽ ﾃ ﾝ ﾎ ﾞ ﾙ ﾄ & ﾊ ﾟ ｯ ｷ ﾝ you attach) L6/L4 common use 3 L type plating thermostat cover (3 ﾎ ﾞ ﾙ ﾄ) $32 (The ｽ ﾃ ﾝ ﾎ ﾞ ﾙ ﾄ & ﾊ ﾟ ｯ ｷ ﾝ you attach) L6/L4 common use 4 L type plated water pump pulley $56 (The ｽ ﾃ ﾝ ﾎ ﾞ ﾙ ﾄ you attach) L6/L4 common use 5 L type plating head front cover $23 (The ｽ ﾃ ﾝ ﾎ ﾞ ﾙ ﾄ & ﾊ ﾟ ｯ ｷ ﾝ you attach) L6/L4 common use 6 L6 plating head triangular cover $28 (ｽ ﾃ ﾝﾎ ﾞ ﾙ ﾄ & ﾊ ﾟ ｯ ｷ ﾝ attaching) 7 L6 plated tappet cover volt/bolt set $28 - 8 L type front cover stainless steel volt/bolt set $28 - L6/L4 common use 9 The NISSAN related plated hubcap set $32 (2 set) 10 L6 tappet cover stainless steel volt/bolt set $9 - 11 Stainless steel volt/bolt set for L6 IN/EX マニ $32   12 Stainless steel volt/bolt set for L6 E/G ･ dynamo bracket $14   13 Stainless steel volt/bolt set for L6 thermo- ･ disbi ･ oil pump $14

* Normal trade-in exchange price is in regard to the tappet cover, the ｡ When there is no exchange is, it becomes the plus \3,000.